Hiboo TOOL
Availability: | |
---|---|
Quantity: | |
HRC50 3flutes mirco end mills
Product Name | tungsten carbide 3 flutes micro end mill milling machine |
Material | Tungsten carbide |
Helix Angle | 45° |
Flutes | 3 Flutes |
Coating | TiSiAlN/nACo blue/uncoated |
Precision | within 0 ~-0.01mm |
Hardness | HRC55/65 |
Machine Type | CNC Milling Machine, engraving machine, precision engraving machine |
Workpiece material | Steel, Cast iron, Alloy steel, Copper, Aluminium etc |
Specification | R0.5*4D*50L*2T |
Style | Mirco end mill |
Suitable for processing steel, stainless steel, nickel alloy, Titanium alloy, cast iron, plastic and other materials' hardness below HRC55
(Order No) | Cutting | Flute | Shank | A.0.L |
d | l | D | L | |
1.0×3×4D×50L×3F | 1 | 3 | 4 | 50 |
1.5×4×4D×50L×3F | 1.5 | 4 | ||
2.0×6×4D×50L×3F | 2 | 6 | ||
2.5×8×4D×50L×3F | 2.5 | 8 | ||
3.0×8×4D×50L×3F | 3 | 8 | ||
3.5×10×4D×50L×3F | 3.5 | 10 | ||
4.0×11×4D×50L×3F | 4 | 11 | ||
3.0× 8×6D×50L×3F | 3 | 8 | 6 | |
3.5×10×6D×50L×3F | 3.5 | 10 | ||
4.0×11×6D×50L×3F | 4 | 11 | ||
4.5×13×6D×50L×3F | 4.5 | 13 | ||
5.0×13×6D×50L×3F | 5 | 13 | ||
5.5×13×6D×50L×3F | 5.5 | 13 | ||
6.0×15×6D×50L×3F | 6 | 15 | ||
7.0×16×8D×60L×3F | 7 | 16 | 8 | 60 |
8.0 ×20×8D×60L×3F | 8 | 20 | ||
9 ×20×10D×75L×3F | 9 | 20 | 10 | 75 |
10×25×10D×75L×3F | 10 | 25 | ||
11×25×12D×75L×3F | 11 | 25 | 12 | |
12×30×12D×75L×3F | 12 | 30 | ||
14×35×14D×100L×3F | 14 | 35 | 14 | 100 |
16×40×16D×100L×3F | 16 | 40 | 16 | |
18×40×18D×100L×3F | 18 | 40 | 18 | |
20×45×20D×100L×3F | 20 | 45 | 20 |
"3-blade aluminum small diameter cutter" is a small diameter milling cutter designed specifically for aluminum and other non-ferrous metals (such as copper, brass, etc.), usually used for high-speed cutting. The following are its main features:
3-blade structure: The three-blade design increases the number of cutting edges per revolution, improves the material removal rate in the processing of softer metals such as aluminum, and maintains a high surface finish. The three-blade design also ensures smooth chip removal and is suitable for high-speed processing.
Small diameter design: The small diameter is suitable for milling small, precise parts and complex structures. The processing process is flexible and fine, especially suitable for precision molds, aerospace parts and 3C products. Details processing.
Helix angle and cutting edge designed specifically for aluminum: In view of the softness of aluminum, it is usually designed with a high helix angle (such as 45°-55°). This structure can provide smoother cutting results. The cutting edge is usually sharp and easy to cut, which helps to reduce cutting heat and prevent aluminum from sticking.
Deep groove chip removal groove: The wide chip removal groove can quickly remove a large amount of chips, reduce the risk of clogging, and improve processing efficiency.
Smooth coating or no coating: Aluminum tools are usually uncoated or use special smooth coatings (such as DLC coatings) to prevent aluminum from adhering to the tool at high temperatures and improve wear resistance.
This type of tool is suitable for fine processing of aluminum alloys and other soft metals, such as contour milling of electronic product housings, mold aluminum alloy parts, shallow groove processing, etc.