Square end mill hardness 55,Helix Angle 35
Design: 2/4 flutes, spiral fluted, right hand cut,1 cutting edge over center, cylindnical shank
Solid carbide material / Coating: Solid-Carbide micro grain/Black Nano
Application: Universal applications, suitable forhight hard materials, as well as aluminiumand non-ferrous metals.The undersized endmills are especially for ftting slot cutting
1. Standard size: 1mm,2mm,3mm,4mm,5mm,6mm8mm,10mm,12mm,14mm,16mm,18mm,20mm
2. Advantages: High Precision,Good Surface & Performace
1. Tungsten steel base material, 45-65 degree high-hardness milling cutter has high efficiency and wide application range.
2. It has higher wear resistance and hardness, sufficient toughness and wear resistance,
and is more durable.
3. The chamfered round handle design is easy to use and has good compatibility.
4. The cutting edge is sharp, the high-precision grinding process reduces vibration, is not easy to break the cutter, and can play a long life.
1.Suitable for heat treatment steel/titanium alloy etc.
2.Precision engineered flute design that provides for superior chip removal at high feed rates
3.Allows for achieving lower cutting forces
4.Features enhanced balance and finish support
5.Helps in enhancing control as well as in bringing reduction in chatter
6.Comes with exceptional performance support
0.4um micro-particle tungsten steel raw material,Higher wear resistance and strength,Micro diameter machining end mills for copper, stainless steel, and steel. Micro milling cutter for heat-treated steel 60HRC, excellent performance.
Applications for:
Tool/Mould/Alloy/Carbon steel etc. high speed processing engraved and cutting.
Advantages:
1.Imported Tungsten Carbide rod.
2.Using Import ANCA Machine high precision grinding, polish processing.
3.Sharpen edge, big chips drain, wear resistance.
4.Many advantage coating choice and cut high hardness materials
1. 100% Virgin Raw Material.
2. 100% QC inspection before shipment.
3. Prompt aftersales service within 24 hours
4.Long use life and high performance
5. Non-Standard sizes and OEM orders are available
6. We are a Real Factory with ISO9001:2015 Certification
7.Suitable for cutting steel/cast iron/aluminum/copper/plastic/alloy steel/titanium alloy etc
Please adjust the parameters according to the material and hardness of workpiece.
Coating:TiSiN,containing silica,very high surface hardness and high thermal resistance.
2Fluters:good for chip removal,easy for vertical feed processing,widely used in slot and hole processing.
4Fluters:high rigidity,widely used in shallow slot,profile milling,and finish machining.
Helix Angle:35deg,high adaptability to the material and hardness of workpiece,widely used to mold and product processing and cost efficient.
Design: 2/4 flutes, spiral fluted, right hand cut,1 cutting edge over center, cylindnical shank
Solid carbide material / Coating: Solid-Carbide micro grain/Black Nano
Application: Universal applications, suitable forhight hard materials, as well as aluminiumand non-ferrous metals.The undersized endmills are especially for ftting slot cutting.