Changzhou Hiboo Tools Co., Ltd

No.26 LingShan Middle Road, No.23-2 Block Tools Industrial Base, Xixiashu Town,

Changzhou City, Jiangsu Province, China

Contact Details

News
Home » News
Factory-Wholesale-HRC55-2mm-Long-Neck-End-Mill-4flute-End-Mills (1).jpg
HRC55 End Mill: What It Cuts Best, and When to Step Up to HRC58

HRC55 and HRC58 share the same 0.7 µm carbide and differ only in coating — AlTiN vs AlTiSiN. Where each one pays, with parameters, life data and conditions.

企业微信截图_17942132095100.png
Ball Nose vs Corner Radius for Hardened Steel Mould Finishing

Corner radius tools cut flat-floor passes by ~80% in a 58 HRC cavity; the cavity as a whole gains 30–45%. Cycle time, conditions and grade limits, with data.

11.9.png
Why Do Carbide End Mills Break in 304 Stainless Steel? 7 Causes and the Grade That Fixes Each

Most end mill breaks in 304 stainless are not tool quality issues. See the 7 real causes, a failure-morphology table, and which grade fixes each one.

企业微信截图_17919592783743.png
How to Choose a Carbide End Mill for Hardened Steel

Learn how to choose a carbide end mill for hardened steel. Compare HRC grades, tool geometry, coatings, flute count, and CNC machining conditions with HIBOO Tools.